E-bikes are heavy. A typical commuter e-bike weighs 22 to 30 kg before you add a rack, panniers, a child seat or the week's shopping, and the flimsy single-leg stand that comes on many bikes (if there's one at all) often isn't up to it. A good kickstand stops the bike toppling over at the shops, makes loading bags and kids far easier, and saves your derailleur, display and paint from being dropped on the concrete. These are the kickstands we'd shortlist for Australian e-bike riders. They're researched picks based on manufacturer and retailer specs and independent reviews, not hands-on tests, and we've listed each stand's weight rating and mounting type so you can check it will fit your bike.
Quick picks
- Best overall for heavy e-bikes: Ursus Jumbo 80 Double Kickstand
- Best single-leg centre stand: Ursus Kaiser Kickstand
- Best rear-mount stand: Pletscher Comp Flex Kickstand
- Best for frames without kickstand mounts: Pletscher Multi Flex Kickstand
- Best for folding e-bikes: Ursus King Mini Kickstand
Before you buy: check how your frame mounts a kickstand
The most common kickstand mistake is buying one that can't bolt onto your bike. Turn the bike over or crouch down and look for one of these:
- A centre mount plate. A flat plate between the chainstays, just behind the motor or cranks, with a single bolt hole. This takes centre-mount stands like the Ursus Jumbo and Kaiser.
- A rear (chainstay) mount. Two threaded holes on the left-hand chainstay near the rear wheel. The gap between them is usually 18 mm or 40 mm, and you need a stand made for that spacing. Measure it centre to centre before ordering.
- No mount at all. Many sporty and mountain-style e-bikes have none. You'll need a clamp-on stand, or ask a bike shop whether there's a frame-specific option from your bike's maker.
Also check your wheel size and tyre width. Stands are sold for particular wheel sizes (often 26 to 29 inch, or 16 to 24 inch for folding bikes), and many won't suit 4-inch fat tyres. If you ride a fat-tyre e-bike, look for a stand the maker lists for fat bikes, or ask the shop you bought the bike from.
The best e-bike kickstands
Ursus Jumbo 80 Double Kickstand
Ursus is an Italian kickstand specialist, and the Jumbo is the double-leg stand you'll see recommended again and again for e-bikes, cargo bikes and bikes with child seats. Retailers list it with a 100 kg maximum load, which is far more than any normal e-bike plus luggage, and it bolts to a centre mount plate. Because it lifts the bike onto two legs, the bike stands upright instead of leaning, which makes it much easier to load panniers or lift a child in and out. The trade-offs: it's heavy and bulky, it needs a centre mount, it hangs lower than a single-leg stand (watch out on high kerbs), and independent reviewers note the bolt needs checking now and then to stop it working loose. Pair it with a steering stop or simply turn the bars straight, so the front wheel doesn't flop sideways when parked.
- Rated to 100 kg by retailers
- Holds the bike upright for loading kids and bags
- Widely recommended for cargo and child-seat bikes
- Heavy and bulky
- Needs a centre mount plate
- Bolt needs occasional retightening
Ursus Kaiser Kickstand
If you don't need a double-leg stand, the Kaiser is a sturdy single-leg alternative for e-bikes with a centre mount. UK retailer Halfords lists it as an alloy stand for 26 and 28 inch bikes, rated to 55 kg and recommended for e-bikes, with a wide foot for stability, a crank bumper to stop the pedal hitting it, and adjustable length held with two screws. It's lighter, cheaper and tidier than the Jumbo, and it tucks up out of the way better. The bike will lean rather than stand upright, so it's less handy if you regularly load a child seat.
- Rated to 55 kg, made with e-bikes in mind
- Adjustable length and wide foot
- Lighter and neater than a double stand
- Bike leans, so loading is less stable
- Needs a centre mount
Pletscher Comp Flex Kickstand
Swiss brand Pletscher has made kickstands for decades, and the Comp Flex is its adjustable rear-mount stand, sold by bike shops as an e-bike kickstand. It bolts to the two holes on the left chainstay, comes in versions for 18 mm and 40 mm hole spacing, and is rated to 50 kg. A small screw adjusts the length in 7.5 mm steps to suit wheels from 20 to 29 inches, so it works on most commuter, hybrid and step-through e-bikes. Because it mounts near the rear wheel it stays clear of the motor and chainring. Make sure you buy the version that matches your frame's hole spacing.
- Rated to 50 kg
- Adjusts to suit 20 to 29 inch wheels
- Stays clear of the motor and cranks
- Must match your 18 mm or 40 mm spacing
- Single leg, so the bike leans
Pletscher Multi Flex Kickstand
No kickstand holes on your frame? The Multi Flex clamps onto the rear stays with brackets instead of bolting into threaded holes. UK retailer SJS Cycles lists it for 20 to 29 inch bikes, rated to 50 kg and suitable for e-bikes, with a strut that adjusts from 210 to 375 mm in 7.5 mm steps, and a weight of about 450 g. Clamp-on stands are a compromise: check it won't foul your disc brake calliper or rack, since one owner had to modify their setup to fit it, and don't overtighten the clamps on a carbon or thin-walled frame. If in doubt, get a bike shop to fit it.
- Fits frames with no kickstand mount
- Rated to 50 kg
- Wide length adjustment
- Can clash with disc brakes or racks
- Not for carbon frames
Ursus King Mini Kickstand
Folding and small-wheeled e-bikes need a shorter stand, and the King Mini is made for them. Halfords lists it for 16, 20 and 24 inch wheels, rated to 40 kg and marketed for electric folding bikes, with a choice of 18 mm or 40 mm fixing plates. That suits most 20-inch folding e-bikes. Note that independent reviewers say it isn't designed for very wide tyres, so it's not the pick for a 20 x 4 inch fat-tyre folder.
- Made for 16 to 24 inch wheels
- Rated to 40 kg
- 18 mm or 40 mm plate options
- Not for fat tyres
- Too short for full-size bikes
Buying guide: what to look for
Weight rating
Add up your bike's weight, plus anything that stays on it when parked: rack, panniers, shopping, a child seat (and a child, if you'll be loading them while the bike is on its stand). Then choose a stand rated comfortably above that. Many cheap stands sold for ordinary bikes are only rated to around 25 to 35 kg, which a loaded e-bike can easily exceed. For family or cargo use, a double-leg stand rated to 80 kg or more is the safe choice.
Single leg or double leg?
A single-leg stand is lighter, cheaper and tucks away neatly, and it's fine for parking a commuter e-bike. A double-leg (centre) stand holds the bike upright with the rear wheel just off or on the ground, which is much more stable for loading a child seat, panniers or a front basket, and handy for adjusting gears. The downsides are weight, bulk and a centre mount requirement.
Length and adjustability
Too short and the bike leans so far it can tip; too long and it stands too upright and falls over the other way. Adjustable stands let you fine-tune this, and you'll want to recheck it if you change tyres or add a heavy rear load.
Safety tip: a kickstand is for parking, not for holding a bike while a child climbs on by themselves. Always keep a hand on the bike when loading or unloading a child seat, and never leave a child sitting on a parked bike. If you're carrying kids in South Australia, read our guide to carrying a child on an e-bike in SA first.
Fitting it
Most stands bolt on with a hex key, but the bolts need to be tight and checked occasionally, because an e-bike's weight and road vibration will work them loose. Use the right length bolt for your frame (it shouldn't poke through and touch the chain or tyre), and make sure the stand clears the chainring, crank and any motor cover when folded. If you're unsure, a bike shop can fit one quickly. A good multi-tool will cover the bolts on most stands.
Racks and kickstands
If you're also adding a rear rack and panniers, check that the rack's struts and the stand don't clash at the rear axle, and that the stand is rated for the extra load. See our guide to the best rear racks for e-bikes.
FAQ
Do e-bikes need a special kickstand?
Not a special type, but a stronger one. E-bikes are much heavier than ordinary bikes, so choose a stand that the maker or retailer rates for e-bikes, with a weight limit well above the weight of your bike plus any load.
Can I fit a kickstand to any e-bike?
Most commuter and step-through e-bikes have a centre or rear kickstand mount. Sporty and mountain-style e-bikes often don't, in which case a clamp-on stand like the Pletscher Multi Flex may work, or your bike's maker may sell a frame-specific stand. Check your frame before you buy.
Is a double kickstand worth it?
If you carry a child seat, a front basket or heavy panniers, yes. A double-leg stand keeps the bike upright and much steadier while loading. For a lightly loaded commuter, a good single-leg stand is lighter and simpler.
Why does my kickstand keep coming loose?
Vibration and the weight of an e-bike slowly loosen the mounting bolt. Tighten it to the maker's recommended torque, check it every few weeks, and make sure the bolt is the right length for your frame.