A flat tyre is annoying on any bike, but on an e-bike it's a proper hassle. The bike is heavy, the rear wheel often has a hub motor and a cable to unplug, and fixing it on the side of the road can take a while. In much of Australia the usual culprits are three-corner jacks (caltrop), bindii, glass and the small bits of wire and gravel that collect on shared paths and road shoulders. The good news is that most flats can be prevented. This guide covers the puncture-resistant tyres, tyre liners and sealants we'd shortlist for Australian e-bike riders. They're researched picks based on manufacturer specs, retailer information and independent reviews, not hands-on tests.
Quick picks
- Best overall tyre: Schwalbe Marathon Plus
- Best e-bike-specific tyre: Schwalbe Marathon E-Plus
- Best alternative tyre: Continental Contact Plus
- Best for wide balloon tyres: Schwalbe Big Ben Plus
- Best tyre liner: Mr Tuffy E-Bike Tyre Liner
- Best sealant for inner tubes: Slime Tube Sealant
- Best sealant for tubeless tyres: Stan's NoTubes Tire Sealant
Three ways to stop flats (and how they fit together)
There are three main tools, and you can combine them:
- Puncture-resistant tyres. These have a thick protective belt under the tread that stops thorns and glass reaching the tube. This is the biggest single upgrade for most riders.
- Tyre liners. A plastic strip that sits between the tyre and the tube. A cheaper way to add protection to the tyres you already have.
- Sealant. A liquid that sits inside the tube (or a tubeless tyre) and plugs small holes as they happen. It's the backup for the thorn that gets through anyway.
A sensible setup for a hub-motor commuter is a puncture-resistant tyre plus sealant in the tube. If you'd rather not replace tyres yet, a liner plus sealant is a cheaper middle ground.
Before you buy: check your tyre size and e-bike rating
Tyre size is printed on the sidewall of your current tyre. Look for the ETRTO size (such as 47-622, meaning 47 mm wide on a 622 mm rim, which is a 700c or 29-inch wheel) as well as the inch size (such as 28 x 1.75 or 26 x 2.15). Match the rim size exactly; width can usually change a little, but check your frame and mudguards have room.
Many tyres also carry an e-bike rating. Schwalbe uses "E-25" and "E-50" and Continental uses "E-Bike Ready", showing the tyre has been tested for e-bike speeds and loads. Standard Australian e-bikes are limited to 25 km/h of motor assistance, so an E-25 rating is the minimum to look for, and E-50 tyres have extra margin for heavy riders and cargo. For more on the speed and power rules, see e-bike power and speed limits in Australia.
The best puncture-resistant tyres and sealants
Schwalbe Marathon Plus
The Marathon Plus has been the go-to "never get a flat" commuter tyre for years, and it's still the one most bike shops recommend. Its SmartGuard layer is a thick band of flexible rubber under the tread, which stops most thorns, glass and tacks before they reach the tube. It's sold in a wide range of sizes, carries an e-bike rating and has reflective sidewalls. The trade-off is weight: it's a heavy, stiff tyre, which matters less on an e-bike because the motor helps you along.
- Very strong puncture protection
- Long-wearing tread
- Reflective sidewalls
- Many sizes for city, trekking and hybrid e-bikes
- Heavy and slower-rolling than lighter tyres
- Notoriously tight to fit onto some rims
Schwalbe Marathon E-Plus
The Marathon E-Plus is Schwalbe's touring tyre designed around e-bikes. It uses a dual-layer puncture protection system and a compound developed for the extra torque and load of a motor, and it's rated for faster e-bikes too. Compared with the Marathon Plus it's aimed at riders who want strong protection with a bit more grip and a livelier ride. It's a premium tyre, so it suits commuters doing lots of kilometres who want to fit good tyres once and forget about them.
- Built specifically for e-bike loads and torque
- Strong puncture protection with good grip
- High e-bike speed rating
- Premium price
- Fewer sizes than the standard Marathon Plus
Continental Contact Plus
Continental's Contact Plus is the main rival to the Marathon Plus for city and commuter e-bikes. It uses Continental's SafetySystem Plus Breaker, a reinforced layer under the tread, and it's labelled E-Bike Ready. Owners tend to find it a little easier to fit and a little lighter-feeling than the Marathon Plus, while still offering strong protection. It's a good choice if your local shop stocks Continental or if you've struggled to get a Marathon Plus onto your rims.
- Strong puncture protection belt
- E-Bike Ready rated
- Reflective sidewalls
- Often easier to fit than the Marathon Plus
- Slightly less protection than the thickest Schwalbe options
- Size range varies by retailer
Schwalbe Big Ben Plus
Lots of popular Australian e-bikes, including cruisers, step-throughs and some cargo bikes, roll on wide "balloon" tyres around 2.15 to 2.4 inches. The Big Ben Plus is Schwalbe's puncture-protected balloon tyre for exactly these bikes. It has a protective belt under the tread and an e-bike rating, and the big air volume gives a comfortable ride on rough bike paths. Check your exact size first, because wide tyres need room in the frame and under the mudguards.
- Comfortable, cushioned ride
- Puncture protection belt
- E-bike rated for heavier loads
- Only suits bikes with room for wide tyres
- Heavier than narrower tyres
Mr Tuffy E-Bike Tyre Liner
If your tyres still have plenty of tread, a liner is a budget-friendly way to add protection. Mr Tuffy liners are a tough plastic strip that sits inside the tyre between the casing and the tube, and the company makes an e-bike range in sizes from 700c and 26-inch up to fat-bike widths. They're sold by width and wheel size, and are colour-coded, so check the chart carefully. Fitting takes a little patience the first time, but there's nothing to maintain afterwards.
- Cheaper than new tyres
- Works with your existing tyres and tubes
- E-bike and fat-bike sizes available
- Adds weight and can feel slightly firmer
- Must be positioned carefully or it can rub the tube
- Not for tubeless setups
Slime Tube Sealant
Most e-bikes still run inner tubes, and Slime is the best-known sealant made for them. You squirt it into the tube through the valve (it works best with Schrader valves or Presta valves with a removable core), and as the wheel turns it coats the inside of the tube. When a thorn pokes a small hole, the sealant is pushed into it and plugs it, often before you notice. It's especially handy on hub-motor rear wheels, where a roadside fix is the most work. If you'd rather not add it yourself, Slime also sells pre-filled self-sealing tubes.
- Cheap and widely available
- Seals many small thorn punctures automatically
- Great backup on hub-motor wheels
- Won't fix large cuts or sidewall damage
- Can make a later patch repair messier
- Needs a valve with a removable core
Stan's NoTubes Tire Sealant
If your e-bike runs tubeless tyres (common on e-MTBs and some gravel and trekking e-bikes), sealant is part of the system rather than an add-on. Stan's NoTubes is one of the longest-running and most widely used tubeless sealants, and bike shops across Australia use it. It seals small punctures quickly as you ride. In hot, dry Australian weather sealant dries out faster, so plan to check and top it up every few months.
- Proven, widely used tubeless sealant
- Seals small punctures as you ride
- Easy to find refills
- Only for tubeless tyres (or tubeless-ready setups)
- Dries out over time, faster in hot weather
Buying guide: what to look for
- Protection level. Tyres with a thick rubber belt (like SmartGuard) give the most protection. Thinner fabric belts are lighter and roll faster but let more through.
- E-bike rating. Look for an E-25 or E-50 marking, or "E-Bike Ready". It means the tyre has been tested for the extra weight and torque.
- Correct size. Match the ETRTO rim size on your current tyre. Don't guess from the inch size alone, as several different rims share similar inch labels.
- Reflective sidewalls. A handy extra for commuters riding at dawn and dusk, alongside proper e-bike lights.
- Valve type. If you plan to add tube sealant, check your valve has a removable core, or buy pre-filled self-sealing tubes.
- Who fits them. Puncture-resistant tyres can be tight to fit, and hub-motor wheels need care with the motor cable and torque washers. If you're not confident, a local bike shop can fit them.
Keep flats away: simple habits
- Check tyre pressure weekly. Heavy e-bikes on soft tyres get "pinch flats" when the tube is squashed against the rim. Ride at the pressure printed on the sidewall, towards the higher end if you carry cargo. A good pump makes this easy: see Best portable bike pumps.
- Look over the tread after rides. Pick out glass and thorns before they work their way through.
- Replace worn tyres. Once the tread is thin or the protective belt shows through, protection drops quickly.
- Carry a backup. Even the best setup can't stop every flat. A patch kit or tubeless plug, tyre levers and a pump are worth carrying: see Best bike multi-tools and repair kits.
FAQ
Are puncture-resistant tyres worth it on an e-bike?
For most riders, yes. E-bikes are heavier and often have hub motors that make roadside repairs harder, so preventing flats saves more time than on a regular bike. The extra weight of a tougher tyre is barely noticeable with motor assistance.
Can I use tyre sealant and a puncture-resistant tyre together?
Yes, and it's a popular combination. The tyre stops most punctures, and sealant in the tube plugs the occasional small one that gets through.
Do tyre liners work with any tyre?
They work with most tyres that use inner tubes, as long as you buy the right width and wheel size. They aren't used with tubeless tyres.
How often should I top up tubeless sealant in Australia?
Sealant dries out over time and faster in heat, so checking every two to four months is a good habit, more often over a hot summer. Follow the sealant maker's advice for your product.
Will puncture-resistant tyres stop every flat?
No tyre is completely puncture-proof. They greatly reduce flats from thorns, glass and small debris, but large cuts, sidewall damage and pinch flats from low pressure can still happen.